-->
For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:
Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.
To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.
- This driver has been designed for communications with devices compliant with the protocol Uni-Telway (Schneider Telemecanique). Uni-Telway is a Master-Slave, serial multi-drop protocol. This protocol is quite complex since it has been engineered to support large, multi-level networks.
- Recommended Resolution. Reinstall the device driver manually. From Start, search for device manager and select Device Manager from the results. Right-click the device in the list. Select Uninstall from the menu that appears. After the device is uninstalled, choose Action on the menu bar. Select Scan for hardware changes to reinstall the driver. Note You may be prompted to provide the path.
For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:
If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.
Cable Drivers
Drivers Telemecanique Port Devices Replacement
MD-CC3/4 and Windows x64 systems
The older versions of the MD-CC30x-001 USB to SPI and MD-CC40x-001 USB to RS-422/485 communication converter cables were developed to work with Windows 32-bit operating systems. These cables must have the the internal ID reset in order to be supported by current Windows 64-bit operating systems.
How do I know if I have an older cable?
The most recent cable will install as 'Silicon Labs C210x USB to UART Bridge (COMXX)' in the device manager of your PC under Ports (COM and LPT).
In the case of MD-CC3 and MD-CC4 cables with the incompatible ID, when the device manager attempts to find the drivers and fails to install them, the message that opens will show the IMS part number: MD-CC400-000 or MD-CC300-000 on the dialog, as shown below.
It provides the link between a PC equipped with a type A USB port and various other devices. Request TELEMECANIQUE XAL-D324, CONTROL STATION, 2NO/1NC online from Elcodis, view and download XAL-D324 pdf datasheet, Control Switches specifications. Whose power and passed AVG virus scan! Also includes GUI front-end for configuring the tablet while. Telemecanique Uni-Telway Driver Deviceresponseinvalid(Tag,Size) 26 Index 27 www.ptc.com 3. TelemecaniqueUni-TelwayDriver Telemecanique Uni-Telway Driver. Connection Type,Serial Port SettingsorEthernet Settings,and Operational Behavior.
Additionally, the part number will display under other devices in your computer's device manager.
Please contact applications for information on cable updates
MD-CC404-000 & MD-CC405-000
The MD-CC404/5-000 drivers are applicable to Lexium MDrive RS-422/485 products. This device is 'plug-n-play' and the drivers should automatically install to an Internet connected PC. Should your network block automated driver installs or the PC not be connected, the drivers may be downloaded from:
MD-CC404-000 Drivers (FTDI VCP Drivers)
Note: This link will open in a new browser tab/window.
MD-CC40x-001
The MD-CC40x-001 drivers are applicable to MDrivePlus and MForce Motion Control RS-422/485 products. This device is 'plug-n-play' and the drivers should automatically install to an Internet connected PC. Should your network block automated driver installs or the PC not be connected, the drivers may be downloaded from:
MD-CC40x-000 Drivers (Silicon Labs CP210x USB to UART Bridge VCP)
Note: This link will open in a new browser tab/window.
Legacy MD-CC40x-001 drivers
Use ONLY with CC4 cables with the IMS ID on 32 bit Windows systems
Driver Package | Installation Instructions
MD-CC30x-001
The MD-CC30x-001 drivers are applicable to MDrivePlus and MForce Step/direction and Speed Control SPI products. This device is 'plug-n-play' and the drivers should automatically install to an Internet connected PC. Should your network block automated driver installs or the PC not be connected, the drivers may be downloaded from:
Drivers Telemecanique Port Devices Adapter
MD-CC30x-001 Drivers (Silicon Labs CP210x USB to UART Bridge VCP)
Note: This link will open in a new browser tab/window.
Legacy MD-CC30x-001 drivers Download usb optical mouse mobile phones & portable devices driver.
Use ONLY with CC3 cables with the IMS ID on 32 bit Windows systems
Driver Package | Installation Instructions
MD-CC50x-000
These drivers apply to the MD-CC500-000 (MDrivePlus and MForce products) and MD-CC501-000 (Lexium MDrive products) USB to CANopen Communications converters
MD-CC50x-000 Drivers (PEAK Systems PCAN-USB)
Note: This link will open in a new browser tab/window.