Garmin Support Center is where you will find answers to frequently asked questions and resources to help with all of your Garmin products. When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the This page contains the VCP drivers currently available for FTDI devices. For D2XX Direct drivers, please click here.

1. Xecuter Port Devices Driver Windows 7
2. Xecuter Port Devices Driver
3. Xecuter Port Devices Drivers
4. Xecuter Port Devices Driver Win 7
5. Xecuter Port Devices Driver Updater

Designed by Team Xecuter in conjunction with the experts at Team Jungle, the X360USB PRO adapter is the most advanced WINAPI/PORTIO to USB adapter ever created. One stand out feature is that you are now able to connect all Xbox 360 DVD drives to any PC or Laptop for the first time simply by connecting to a USB port. Nand-X programmer device-Nand-X to nand header wires (cable that goes from the nand-x to the 360's motherboard)-Nandx to CR programming cable. (cable that goes from the nand-x to glitch chips in order to program them).also includes 6-pin bit of pin header.

This article describes an issue that occurs when you use a FireWire port-based device in Windows 8.1 or Windows 8. Download tbs driver online. Additional steps of configuration is required to enable this update after the installation.

Symptoms

Assume that you have a computer that equips with an IEEE 1394 FireWire controller card. After you upgrade the computer from Windows 7 to Windows 8.1 or Windows 8, devices that connect to the computer by using a FireWire port do not work.

Cause

This issue occurs because the legacy 1394 bus drivers (1394bus.sys and Ochi1394.sys) are removed in Windows 8.1 or Windows 8.

Resolution

Update information

How to obtain this update

Microsoft Download Center

The following files are available for download from the Microsoft Download Center:

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Additional steps of configuration requirement

After you install the 1394 OHCI Legacy Driver.msi file, follow these steps:

1. Right-click the Legacy1394.inf file under one of the following paths based on the computer's architecture:
   

   • C:Program Files1394 OHCI Compliant Host Controller (Legacy)x86_driver

   • C:Program Files1394 OHCI Compliant Host Controller (Legacy)x64_driver

2. Click Install.

3. Open Device Manager in Control Panel.

4. Expand IEEE 1394 Bus host controllers, and then locate the host controller.

5. Right-click the host controller, and then click Update Driver Software.
   The screen shot of the host controller and the Update Driver Software is listed in the following example:
   

6. Click Browse my computer for driver software.

7. Click Let me pick from a list of device drivers on my computer.

8. Click Generic1394 OHCI compliant host controller (Legacy), and then click the Next button.

9. Click the Close button.

Prerequisites

There are no prerequisites for installing this update.

Registry information

To apply this update, you do not have to make any changes to the registry.

Restart requirement

You have to restart the computer after you apply this update.

Update replacement information

This update does not replace a previously released update.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 8.1 and Windows 8 file information notesThe MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are not listed

For all supported x86-based versions of Windows 8.1 or of Windows 8

For all supported x86-based versions of Windows 8.1 or of Windows 8

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the 'Applies to' section.

More Information

Steps of uninstalling the 1394 OHCI Legacy Driver.msi file

1. Open Control Panel in the Category view.

2. Click Uninstall a program in Control Panel.

3. Right-click 1394 OHCI Compliant Host Controller (Legacy), and then click Uninstall.
   The screen shot of uninstalling the 1394 OHCI Compliant Host Controller (Legacy) is listed in the following example:
   

Xecuter Port Devices Driver Windows 7

Additional package information

Xecuter Port Devices Driver

• This driver is only intended to work with legacy 1394 host controllers. Therefore, you may experience lower transfer data rates than the 1394b driver.

• The driver is intended to resolve compatibility issues for 1394 peripherals on 1394b systems. If you are not experiencing these issues, you should continue to use inbox drivers that are provided in Windows 8.1 or Windows 8.

• You have to reinstall this stand-alone driver package if you upgrade to a newer operating system version in the future.

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Xecuter Port Devices Drivers

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Xecuter Port Devices Driver Win 7

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

Xecuter Port Devices Driver Updater

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

1. Install the device-specific driver (see Method 2).
2. Open Device Manager.
3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.